Starting the System
4.6.2 Standard Input
♦ SELECT AN INPUT FIELD
There are 2 possibilities to select an input field:
1. by means of the trackball
2. by means of the keyboard
1. Input field selection possibility:
Trackball: position the cursor in the input field
Enter: select an input field, press the right or left trackball key
2. Input field selection possibility:
Press the [Enter] or [Tab] (input fields are selected in a successive order).
♦ ENTER PATIENT INFO
Use the keyboard to type the patient info.
Upon pressing the [Enter] key on the keyboard the data is entered and the next input
field is selected.
♦ MENU CONTROL KEYS
Exit from the patient procedure to the previous operating state.
The patient info previously entered will be cleared.
The patient info is temporarily stored.
The Input procedure is closed and the previous operating state is activated.
Note:
The system creates automatically a Patient Identification (ID) number.
To create your own ID number, overwrite the automatic ID number using the keyboard.
Voluson
®
730Pro - Basic User Manual
105831 Rev. 0 4-9
To Next Page
Loading...
