Measurement Setup
18.3.2.2 Tables
The second page of the Obstetric Setup is the “Tables” Page.
On this page you can select for each measurement type the author desired.
Additionally, select the desired Fetal Weight Unit.
1. Select the item among: G.A., Fetal Growth , FW or FW Growth.
2. Move the mouse pointer using the trackball to an author of the measurement desired and press
[Set] (right trackball key).
EXPLANATIONS:
• G.A. (Gestational Age) / FW
These are normal ranges for estimating an unknown gestational age from the sonographically
measured variable.
• Fetal Growth / FW Growth
This are normal ranges for sonographically determined variables as a function of gestational age.
Therefore, the Last Menstruation Period (LMP) must be entered in the Patient ID Info first,
otherwise the Growth Curve [Graph] won’t be shown in the Report.
Voluson
®
730Pro - Basic User Manual
18-8 105831 Rev. 0
To Next Page
Loading...
