GE Voluson 730Pro - Exit the CW Submenu; CW + 2 D + Color Information (Triplex Mode)

Spectral Doppler Mode
7.2.3.4 Exit the CW Submenu
Press the [Exit] key on the control panel to exit the CW Submenu.
•
•
7.2.4 CW + 2D + Color Information (Triplex Mode)
Triplex mode is the simultaneous real-time display of 2D mode, Spectral Doppler and Color Doppler.
There are two possibilities to combine Continuous Wave Doppler (CW) with Color Information:
CW + 2D mode + Color Doppler mode (CFM)
CW + 2D mode + Power Doppler mode (PD)
With the [Change Menu] key on the control panel it is possible to switch between CW
menu, CFM and PD menus and the appendant Submenus to readjust the settings.
Remark:
Changing the mode menu is only possible in write mode.
Voluson
®
730Pro - Basic User Manual
7-22 105831 Rev. 0