GE Voluson 730Pro - Render View Direction; Gray Chroma Map

Volume Mode
11.3.1 Render View Direction
The 3D render box determines the ROI (region of interest) for the 3D calculation and determines the
direction of the view through the volume block. The adjustment of the render box is done with help of
the 3 orthogonal planes A, B and C, each dividing the box in the middle.
The direction of the view is adjustable: review also The Render Box
(chapter 11.1.5)
Select the desired Render Direction.
2
4
6
1
3
5
Explanation for the Render Box direction Up/Down:
Plane A: The viewing direction is from top to bottom in plane C.
Plane B: The viewing direction is from top to bottom in plane B
Plane C: The viewing direction is normal on plane C (bird’s eye view).
The green line of the rendering box in A- and B-plane symbolizes the direction of the view and the
border for starting the analysis.
Note:
The Render View Direction keys are not available in Static 3D Sectional Planes mode.
11.3.2 3D Gray Chroma Map
Operation review: 3D Gray Map
(chapter 12.1.2)
Voluson
®
730Pro - Basic User Manual
105831 Rev. 0 11-29