PD Mode
9.1 PD Main Menu
PD Mode key (hard key)
By pressing the control [PD] the PD Mode is switched on and the PD Box appears on
the active 2D image.
To use the PD mode review: PD Operation
(chapter 9.2)
To adjust the PD settings review: PD Sub Menu
(chapter 9.3)
The “PD Main” menu appears on the screen (write mode).
Remarks:
* Changing the Quality, Frequency, WMF, PRF and Steering is only possible in write mode!
* Beam steering is only possible with linear probe and in write mode.
Voluson® 730Pro - Basic User Manual
105831 Rev. 0 9-3
To Next Page
Loading...
