Probes and Biopsy
20.12.4 Coupling Gels
Do not use unrecommended gels (lubricants).
They may damage the probe and void the warranty.
Applying:
In order to assure optimal transmission of energy between the patient and probe, a conductive gel or
couplant must be applied liberally to the patient where scanning will be performed.
Precautions:
Coupling gels should not contain the following ingredients as they are known to cause probe damage:
• Methanol, ethanol, isopropanol, or any other alcohol-based product
• Mineral oil
• Iodine
• Lotions
• Lanolin
• Aloe Vera
• Olive Oil
• Methyl or Ethyl Parabens (para hydroxybenzoic acid)
• Dimethylsilicone
20.12.5 Planned Maintenance
The following maintenance schedule is suggested for the system and probes to ensure optimum
operation and safety.
Do the Following Daily After Each Use As Necessary
Inspect the Probes X
Clean the Probes X
Disinfect Probes X
Voluson
®
730Pro - Basic User Manual
105831 Rev. 0 20-19
To Next Page
Loading...
