GE Voluson 730Pro - Basic Measurements

Basic Measurements
13. Basic Measurements
Basic Measurement - Caliper key (hard key)
By pressing the [Caliper] key the Basic Measurement function is switched on and a
caliper appears within the frozen image area.
The Basic Measurements function supports 5 types of simple measurements.
1) Distance Measurements:
(chapter 13.2)
• Distance
• M Distance (only available in M mode)
2) Area Measurements: (chapter 13.3)
• 2D-Ellipse
• 2D-Trace
3) Volume Measurements: (chapter 13.4)
• 3 Distance
• 1 Distance + Ellipse
• 1 Distance
• 1 Ellipse
• 3D-MultiPlane (only available in Volume mode)
4) Doppler Measurements: (chapter 13.5)
• Velocity
• A/B
• Manual Trace
• Auto Trace
5) Diverse Measurements: (chapter 13.6)
• Hip Joint
Voluson
®
730Pro - Basic User Manual
13-2 105831 Rev. 0