GE Voluson 730Pro - Real Time 4 D Acquisition During Active High Resolution Zoom

Volume Mode
11.5.2 Real Time 4D Acquisition During Active High Resolution Zoom
1. Press the [HR-Zoom] key.
2. Place the zoom box over the region of interest.
The trackball has two functions: adjusting position or size of the zoom box.
The activated function is displayed in the status area of the trackball.
Press the upper trackball key to change the function of the trackball from position to
size or vice versa.
3. Change the size of the zoom box by moving of the trackball.
Moving: ↑ decrease the box size in vertical direction
↓ increase the box size in vertical direction
→ increase the box size in horizontal direction
← decrease the box size in horizontal direction
4. Press the [HR-Zoom] key again to activate the high resolution zoom.
Alternatively press the right trackball key.
5. Press the [4D] key to activate Volume mode.
6. Select the desired Visualization mode.
Operation: Real Time 4D Acquisition (chapter 11.5)
Remarks:
* Real Time 4D Acquisition not possible in PD- and CFM mode.
Press the [HR-Zoom] key again to exit the High Resolution Zoom function.
Voluson
®
730Pro - Basic User Manual
105831 Rev. 0 11-55