GE Voluson 730Pro - Line Density; TD Map

TD Mode
10.3.6 Line Density
This function determines the line density within the TD box. The lower the line density, the greater the
distance between lines and the size of the color pixels.
Switch the [Line D.] key and adjust the line density.
max. value: 10
min. value: 1
step size: 1
Touch up or down to increase or decrease the line density.
Remark:
*
Changes are only possible in write mode.
10.3.7 TD Map
This function provides selectability of the color coding for an optimization of the display of motion
(similar to the post-processing curves with grayscale 2D).
It may be altered in real time or Freeze mode, respectively.
Selection of a TD Map curve:
Switch the [TD Map] key repeatedly to select the desired TD Map. (1 to 4)
Remark:
*
Changes are only possible in write mode.
Voluson
®
730Pro - Basic User Manual
10-10 105831 Rev. 0