Technical Data / Information
23.4 Scan Converter
Video memory size: 800 x 600 x 32 bit
Image memory: 4 MB
Gray scale values: 256 (8 bit)
Depth range: depends on used probe
Image lines: max. 1024
Scan angle: max. 360°
Aspect ratio: min. 0.25:1 to max. 8:1 (write 5:1, read factor 0.8 to 2.4),
incremental magnification, no loss of resolution.
M Mode: M mode search line positionable at each scan line
M Mode depth range: same as 2D image
M Mode full screen scroll time: 300 / 225 / 150 / 100 Pixels/sec. (50 Hz) in relation to monitor width
3.5 / 5.0 / 7.5 / 10 cm/s
2D/M Mode simultaneous: yes (multi-element probes)
23.5 Cine Loop Memory
Capacity: up to 256MB
max. 1024 2D images
Call-up of sequence: manual image by image
automated: 50 to 100% of real-time rate, liberal selection of start- and end
image
23.6 Display Modes
2D scan: Single, Dual, Quad,
Trapezoid mode, Focus and Frequency Composite (FFC),
Harmonic Imaging, β-View (Beta View)
3D scan: Multiplanar analysis, Volume scan
4D scan: Real Time 4D,
M Mode: 2D/M
Doppler Mode: 2D/D horiz. Partition, three different formats small, mid, large
Color Doppler Mode: 2D/CFM (Single, Dual, Quad), 2D/CFM+D, 2D+2D/C
Image orientation: left/right and up/down selectable
Voluson
®
730Pro - Operation Manual
105831 Rev. 0 23-5
To Next Page
Loading...
