Printing / Recording / Saving / Sending
16.3.4 Saving 4D
Operation:
1. Press this key to save the scanned volume.
The menu area displays the “Save 3D/4D” menu.
2. Select the desired
“Save Mode” and
“Save Options”.
Note:
The “DICOM Options” block is only visible if the save destination
“DICOM Server” is selected in the System Setup.
3. Select the desired “Save/Send” destination among:
Saving to Sonoview
Sending to an external DICOM server.
Saving to Sonoview as well as sending to an external DICOM server.
4. Press the right or left trackball key to save the scanned 3D volume.
During the save process the message “Saving in progress” will be displayed on the screen!
Save with Comment
review: (chapter 16.3.6)
For restoring of saved images review: Sonoview
(chapter 15)
Voluson
®
730Pro - Basic User Manual
16-10 105831 Rev. 0
To Next Page
Loading...
