Volume Mode
11.5.4 After the Real Time 4D Acquisition
After [Freeze] the system switches automatically to read mode and the “4D Cine” menu appears.
The selected format will be present on the monitor.
Auto Cine Start/Stop
Toggle function: [Start / Stop]
Press the left trackball key [Start] to activate the 4D Cine.
By pressing the left trackball key, the last 64 frames of a real time 4D
sequence will be displayed image by image with the trackball.
Loop Mode Direction
Scan in both directions through the image block:
First image...last image, last image...first image, etc.
Scan in one direction through the image block:
First image...last image, first image...last image, etc.
Cine Speed
The speed of sequencing through the number of images can be varied between
6%, 12%, 25%, 50%, 100%, 200%, and 400%.
Press the [Exit] key on the control panel, or select the [Volume Edit]
item from the menu area to change to the “3D” menu.
review: After the 3D Sectional Planes Acquisition
(chapter 11.2.2)
After the 3D Rendering Acquisition
(chapter 11.4.1)
Voluson
®
730Pro - Basic User Manual
105831 Rev. 0 11-63
To Next Page
Loading...
