GE Voluson 730Pro - Before Starting Cardiac Calculations; To Enter Basic Cardiac Information

Calculations and Patient Reports
14.7.2 Before starting Cardiac Calculations
Make sure that the patient information is correct and the probe and application are selected properly.
If another application is selected, press the [Probe] key and confirm which application is selected
currently in the probe selection menu screen. Change the application to Cardio.
Refer to: Probe/Program Selection
(chapter 4.5)
Patient information must first be registered via the Patient Information menu.
To cancel all calculations performed before and begin a new measurement, press the [End Exam] key
on the control panel.
14.7.3 To enter Basic Cardiac Information
Enter the information for the Cardiac Calculations in addition to the basic patient
information via the [Patient] key and select the Application Cardio.
The selected information appears as follows.
The patient information for the cardiac calculations includes Height, Weight, HR (Heart Rate).
When the patient's Height and Weight is entered, the BSA (Body Surface Area) is automatically
displayed.
Voluson
®
730Pro - Basic User Manual
14-26 105831 Rev. 0