Printing / Recording / Saving / Sending
16.3.3 Saving 3D
Operation:
1. Press this key to save the scanned volume.
The menu area displays the “Save 3D/4D” menu.
2. Select the desired
“Save Mode” and
“Save Options”.
Note:
The “DICOM Options” block is only visible if the save destination
“DICOM Server” is selected in the System Setup.
Note:
It is possible to store both, combination of Volume and Cine sequence
either in the Sonoview or to the external DICOM server.
3. Select the desired “Save/Send” destination among:
Saving to Sonoview
Sending to an external DICOM server.
Saving to Sonoview as well as sending to an external DICOM server.
4. Press the right or left trackball key to save the scanned 3D volume.
During the save process the message “Saving in progress” will be displayed on the screen!
Save with Comment
review: (chapter 16.3.6)
For restoring of saved images review: Sonoview
(chapter 15)
Voluson
®
730Pro - Basic User Manual
105831 Rev. 0 16-9
To Next Page
Loading...
