GE Voluson 730Pro - Glass Body Render Mode

Volume Mode
11.4.2.3 Glass Body Render Mode
In Glass Body Render Mode the color and the gray information are processed into a 3D/PD or
3D/CFM volume.
1. Activate Glass Body Render Mode (if not active).
2. Select desired render algorithm.
Note:
Always select 2 modes!
The following Rendering combinations are possible:
Color acquisition in Power mode
Gray Mode
Color Mode
Tran
sp.
T
e
xt
u
r
e
Su
rfa
ce
Tran
sp.
T
e
xt
u
r
e
Tran
s.
Max
Transp. Max Surface
Transp. Max Transp. Max
In case Surface mode is selected, it will normally be necessary to adjust the low threshold for the
border recognition of the surface. These threshold values do not apply for the Transparent modes!
Adjustment of Threshold low and Transparency review Color Render mode:
• Threshold low
(chapter 11.4.2.1.1)
• Transparency
(chapter 11.4.2.1.2)
Adjustment of Balance and Power Threshold review Sub Menus:
Balance
(chapter 11.3.5)
•
Power Threshold
(chapter 11.3.6)
•
Voluson
®
730Pro - Basic User Manual
11-44 105831 Rev. 0