Volume Mode
Depending on the “Render Mode” setting, the skin (of the shell contour) or the rendered
volume image within the shell contour is displayed in the lower right quadrant.
review: Render Mode and Display of the Shell Geometry
(chapter 11.6.4)
Depending on the “Render Mode” setting, the skin (of the shell contour) or the rendered
volume image within the shell contour is displayed in full size format.
review: Render Mode and Display of the Shell Geometry
(chapter 11.6.4)
Select the [V. Niche] item.
The surface of the (shell) contour is cut up and the slices of the 3D image and the surface of the (shell)
contour is displayed in one image.
The “Static 3D VOCAL - Niche” menu is displayed on the monitor’s menu area.
1. Select one of the [View] keys to change the position of the niche.
2. Select the Niche rotation axis.
• Select [horizontal] to rotate about the X-axis.
• Select [vertical] to rotate about the Y-axis.
Voluson
®
730Pro - Basic User Manual
105831 Rev. 0 11-75
To Next Page
Loading...
