Description of the System
3D/4D Image Orientation
press this key to change the image orientation of the 3D-image
Up/Down Image Orientation
to alternate between up and down image orientation
Left/Right Image Orientation
to alternate between left and right image orientation
Initial Position
resets the rotations and translations of a volume section to the initial position
Beam steering
pressing evokes beam steering, provided the active probe allows for it
Single-Screen Format
select the display format (Single screen display) in 2D and 3D image mode
Dual-Screen Format (vertical distribution)
select the display format (Dual screen display) in 2D and 3D image mode
operation review:
Dual-Screen Format (chapter 5.15.1)
Quad-Screen Format
select the display format (Quad screen display) in 2D and 3D image mode
operation review:
Quad-Screen Format (chapter 5.15.2)
Dual-Screen Format (horizontal distribution)
At the time being the horizontal format is not yet implemented!
VCR Remote Control
operation review: VCR Recording
(chapter 16.2)
Voluson
®
730Pro - Basic User Manual
105831 Rev. 0 3-15
To Next Page
Loading...
