Operation Manual - Network Protocol
Quidway S3500 Series Ethernet Switches Chapter 2 ARP Configuration
Huawei Technologies Proprietary
2-7
Operation Command
Display ARP source suppression
information
display arp source-suppression
Reset ARP mapping table
reset arp [ dynamic | static | interface
{ interface-type interface-number |
interface-name } ]
Enable ARP information debugging
debugging arp packet
Disable ARP information
debugging
undo debugging arp packet
Note that display arp probe [ interface vlan-interface vlan-id ] command is
supported by S3526/S3526 FM/S3526 FS switches.