Huawei Quidway S3500 Series User Manual

Operation Manual - System Management
Quidway S3500 Series Ethernet Switches Chapter 5 SNMP Configuration
Huawei Technologies Proprietary
5-5
5.3.5 Set Lifetime of Trap Message
You can use the following command to set lifetime of Trap message. Trap message that
exists longer than the set lifetime will be dropped.
Perform the following configuration in system view.
Table 5-6 Set the lifetime of Trap message
Operation Command
Set lifetime of Trap message snmp-agent trap life seconds
Restore lifetime of Trap message undo snmp-agent trap life
By default, the lifetime of Trap message is 120 seconds.
5.3.6 Set SysLocation
The sysLocation is a management variable of the MIB system group, used for
specifying the location of managed devices.
You can use the following commands to set the sysLocation.
Perform the following configuration in system view.
Table 5-7 Set sysLocation
Operation Command
Set sysLocation
snmp-agent sys-info location sysLocation
Restore the default location
of the Ethernet switch
undo snmp-agent sys-info location
By default, the sysLocation is specified as “Beijing China”.
5.3.7 Set SNMP Version
You can use the following commands to set the Set SNMP Version.
Perform the following configuration in system view.
Table 5-8 Set SNMP Version
Operation Command
Set SNMP Version
snmp-agent sys-info version { { v1 | v2c | v3 } *
| all }
Restore the default SNMP
Version of the Ethernet switch
undo snmp-agent sys-info version { { v1 | v2c |
v3 } * | all }

Huawei Quidway S3500 Series Specifications

General

Brand	Huawei
Model	Quidway S3500 Series
Category	Network Router
Language	English