Operation Manual - VLAN
Quidway S3500 Series Ethernet Switches Chapter 4 Super VLAN
Huawei Technologies Proprietary
4-2
Table 4-1 Configure a super VLAN
Operation Command
Configure a super VLAN
supervlan
Remove super VLAN configuration
undo supervlan
Note that:
z You cannot configure Ethernet ports for the super VLAN.
z When a VLAN is configured as a super VLAN, ARP proxy is automatically enabled
on it.
z As long as super VLAN configuration is not removed, ARP proxy cannot be
disabled on the corresponding VLAN interface.
4.2.2 Configuring a Sub VLAN
You can configure a sub VLAN just as configuring a general VLAN. See Chapter 1
VLAN Configuration for details.
Perform the following configuration in the specified views.
Table 4-2 Configure a sub VLAN
Operation Command
Create a sub VLAN and enter the
corresponding view (system view)
vlan vlan-id
Delete a sub VALN (system view) undo vlan { vlan-id [ to vlan-id ] | all }
Add an Ethernet port for the sub VLAN
(VLAN view)
port interface-list
Delete an Ethernet port from the sub
VLAN (VLAN view)
undo port interface-list
You can add multiple Ethernet ports (except the uplink port) for a sub VLAN.
4.2.3 Configuring the Mapping between Super a VLAN and a Sub VLAN
Perform the following configuration in VLAN view of the super VLAN.
To Next Page
Loading...
Need help?
General
