Huawei Quidway S3500 Series User Manual

Operation Manual - Multicast
Quidway S3500 Series Ethernet Switches Chapter 7 PIM-SM Configuration
Huawei Technologies Proprietary
7-12
[Quidway-vlan-interface12] ip address 3.3.3.4 255.255.0.0
[Quidway-vlan-interface12] pim sm
[Quidway-vlan-interface12] quit
[Quidway] vlan 30
[Quidway-vlan30] port ethernet 0/4
[Quidway-vlan30] quit
[Quidway] interface vlan-interface 30
[Quidway-vlan-interface30] ip address 5.5.5.6 255.255.0.0
[Quidway-vlan-interface30] pim sm
[Quidway-vlan-interface30] quit
7.5 PIM Troubleshooting
Fault: The router fails to establish the multicast routing table.
Troubleshooting: Follow the steps below:
Make sure that the unicast routes are correct before settling to the problem.
z PIM-SM requires support from the RP and the BSR. Use the display pim bsr-info
command to check for BSR information. If none, check for the unicast routes
towards the BSR. Then use the display pim rp-info command to check for RP
information. If none, also check the unicast routes.
z Use the display pim neighbor command to check whether the neighbor
relationship has been established correctly.

Huawei Quidway S3500 Series Specifications

General

Brand	Huawei
Model	Quidway S3500 Series
Category	Network Router
Language	English