Huawei Quidway S3500 Series User Manual

Operation Manual - Security
Quidway S3500 Series Ethernet Switches Chapter 1 802.1x Configuration
Huawei Technologies Proprietary
1-11
Table 1-12 Configuring the maximum retry times for the switch to send version request
frame to the client
Operation Command
Configure the maximum retry times for the
switch to send version request frame to the
client
dot1x retry-version-max
max-retry-version-value
Return to the defaults
undo dot1x retry-version-max
By default, the switch tries 3 times at the most to send version request frame to the
access user.
III. Configuring the timeout timer of version authentication
Perform the following in system view.
Table 1-13 Configuring the timeout timer of version authentication
Operation Command
Configure parameters of the timer
dot1x timer ver-period ver-period-value
Return to the defaults
undo dot1x timer ver-period
By default, ver-period-value is 1 second.
1.2.11 Setting the Maximum Times of Authentication Request Message
Retransmission
The following commands are used for setting the maximum retransmission times of the
authentication request message that the switch sends to the supplicant.
Perform the following configurations in system view.
Table 1-14 Setting the maximum times of the authentication request message
retransmission
Operation Command
Set the maximum times of the authentication
request message retransmission
dot1x retry max-retry-value
Restore the default maximum retransmission
times
undo dot1x retry
By default, the max-retry-value is 3. That is, the switch can retransmit the
authentication request message to a supplicant for 3 times at most.

Huawei Quidway S3500 Series Specifications

General

Brand	Huawei
Model	Quidway S3500 Series
Category	Network Router
Language	English