Huawei Quidway S3500 Series User Manual

Operation Manual - Multicast
Quidway S3500 Series Ethernet Switches Chapter 3 IGMP Snooping Configuration
Huawei Technologies Proprietary
3-9
3.4 IGMP Snooping Configuration Example
3.4.1 Enable IGMP Snooping
I. Networking requirements
To implement IGMP Snooping on the switch, first enable it. The switch is connected
with the router via the router port, and with user PC through the non-router ports.
II. Networking diagram
Internet
Multicast
Switch
Router
Figure 3-4 IGMP Snooping configuration networking
III. Configuration procedure
# Display the status of GMRP.
<Quidway> display gmrp status
# Display the current status of IGMP Snooping when GMRP is disabled.
<Quidway> display igmp-snooping configuration
# Enable IGMP Snooping if it is disabled.
[Quidway] igmp-snooping enable
3.5 Troubleshoot IGMP Snooping
Fault: Multicast function cannot be implemented on the switch.
Troubleshooting:
1) IGMP Snooping is disabled.
z Input the display current-configuration command to display the status of IGMP
Snooping.
z If the switch disabled IGMP Snooping, you can input igmp-snooping enable in
the system view to enable IGMP Snooping.

Huawei Quidway S3500 Series Specifications

General

Brand	Huawei
Model	Quidway S3500 Series
Category	Network Router
Language	English