EasyManuals Logo

Huawei Quidway S3500 Series User Manual

Huawei Quidway S3500 Series
671 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #124 background imageLoading...
Page #124 background image
Operation Manual - Network Protocol
Quidway S3500 Series Ethernet Switches Chapter 5 DHCP Configuration
Huawei Technologies Proprietary
5-8
Table 5-5 Create global DHCP address pool
Operation Command
Create a DHCP address pool and/or
access the DHCP address pool view
dhcp server ip-pool pool-name
Delete a DHCP address pool
undo dhcp server ip-pool pool-name
By default, no DHCP global address pool is created.
Note that the VLAN interface address pool for a VLAN interface is created by the
system after you assign a unicast address to the VLAN interface and in the VLAN
interface view specify to allocate addresses from VLAN interface address pools by
using the dhcp select interface command.
5.3.2 Configure Address Allocation Method for a DHCP Address Pool
You can select static address binding or dynamic address allocation as needed. For a
global DHCP address pool, you can only configure either method. For the address pool
on a VLAN interface, however, you can use both except that the address range of the
pool is the IP address segment connected to the VLAN interface when dynamic
allocation applies.
Dynamic address allocation requires an address range for allocation whereas static
address bindings can be regarded as a special DHCP address pool containing only the
bindings.
I. Configure static address binding for a global DHCP address pool
Some DHCP clients may require fixed IP addresses, that is, IP addresses bound with
their MAC address. When such a DHCP client requests for an IP address, the DHCP
server looks up the maintained IP-MAC address bindings and allocate to the client the
IP address bound with its MAC address. At present, each global DHCP address pool
supports only one IP-MAC address binding.
Perform the following configuration in DHCP address pool view.
Table 5-6 Configure a static address binding for the global DHCP address pool
Operation Command
Specify an IP address for the static
binding
static-bind ip-address ip-address
[ mask netmask ]
Delete the IP address in the static
binding
undo static-bind ip-address
Specify a client MAC address for the
static binding
static-bind mac-address mac-address

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei Quidway S3500 Series and is the answer not in the manual?

Huawei Quidway S3500 Series Specifications

General IconGeneral
BrandHuawei
ModelQuidway S3500 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals