Huawei Quidway S3500 Series User Manual

Operation Manual - System Management
Quidway S3500 Series Ethernet Switches Chapter 1 File System Management
Huawei Technologies Proprietary
1-7
Perform the following configuration in corresponding view.
Table 1-11 Configure the FTP Server Authentication and Authorization
Operation Command
Create new local user and enter local
user view(system view)
local-user username
Delete local user(system view)
undo local-user [ username | all
[ service-type ftp ] ]
Configure password for local user(local
user view)
password [ cipher | simple ] password
Configure service type for local
user(local user view)
service-type ftp ftp-directory directory
Cancel password for local user(local
user view)
undo password
Cancel service type for local user(local
user view)
undo service-type ftp [ ftp-directory ]
Only the clients who have passed the authentication and authorization successfully can
access the FTP server.
1.3.4 Configure the Running Parameters of FTP Server
You can use the following commands to configure the connection timeout of the FTP
server. If the FTP server receives no service request from the FTP client for a period of
time, it will cut the connection to it, thereby avoiding the illegal access from the
unauthorized users. The period of time is FTP connection timeout.
Perform the following configuration in system view.
Table 1-12 Configure FTP server connection timeout
Operation Command
Configure FTP server connection timeouts
ftp timeout minute
Restoring the default FTP server connection timeouts
undo ftp timeout
By default, the FTP server connection timeout is 30 minutes.
1.3.5 Display and Debug FTP Server
After the above configuration, execute display command in any view to display the
running of the FTP Server configuration, and to verify the effect of the configuration.

Huawei Quidway S3500 Series Specifications

General

Brand	Huawei
Model	Quidway S3500 Series
Category	Network Router
Language	English