EasyManuals Logo

Huawei Quidway S3500 Series User Manual

Huawei Quidway S3500 Series
671 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #257 background imageLoading...
Page #257 background image
Operation Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches Chapter 6 IP Routing Policy Configuration
Huawei Technologies Proprietary
6-6
Operation Command
Cancel the routing cost of the routing
information
undo apply cost
set the cost type of the routing information apply cost-type [ internal | external ]
remove the setting of the cost type
undo apply cost-type
Set the route origin of the BGP routing
information
apply origin { igp | egp as-number |
incomplete }
Cancel the route origin of the BGP routing
information
undo apply origin
Set the tag domain of the OSPF routing
information
apply tag value
Cancel the tag domain of the OSPF
routing information
undo apply tag
By default, perform no settings.
Please note that if the routing information meets the match conditions specified in the
Route-policy and also notifies the MED value configured with apply cost-type internal
when notifying the IGP route to the EBGP peers, then this value will be regarded as the
MED value of the IGP route. The preference configured with the apply cost-type
internal is lower than that configured with the apply cost command, but higher than
that configured with the default med command.
6.2.4 Importing Routing Information Discovered by Other Routing Protocols
A routing protocol can import the routes discovered by other routing protocols to enrich
its route information. And the Route-policy can be used for route information filtering to
implement the purposeful redistribution. If the destination routing protocol importing the
routes cannot directly reference the route costs of the source routing protocol, you
should satisfy the requirement of the protocol by specifying a route cost for the
imported route.
Perform the following configuration in routing protocol view.
Table 6-4 Configuring to import the routes of other protocols
Operation Command
Set to import routes of other
protocols
import-route protocol [ med med | cost cost ] [ tag
value ] [ type 1 | 2 ] [ route-policy
route-policy-name ]
Cancel the setting for
importing routes of other
protocols
undo import-route protocol

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei Quidway S3500 Series and is the answer not in the manual?

Huawei Quidway S3500 Series Specifications

General IconGeneral
BrandHuawei
ModelQuidway S3500 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals