Huawei Quidway S3500 Series User Manual

Operation Manual - System Management
Quidway S3500 Series Ethernet Switches Chapter 1 File System Management
Huawei Technologies Proprietary
1-4
Table 1-5 Display the configurations of the Ethernet switch
Operation Command
Display the saved-configuration
information of the Ethernet switch
display saved-configuration
Display the current-configuration
information of the Ethernet switch
display current-configuration [ controller |
interface interface-type [ interface-number ] |
configuration [ system | user-interface ] ] [ |
{ begin | exclude | include }
regular-expression ]
 Note:
The configuration files are displayed in their corresponding saving formats.
1.2.3 Save the Current-configuration
Use the save command to save the current-configuration in the Flash Memory, and the
configurations will become the saved-configuration when the system is powered on for
the next time.
Perform the following configuration in user view.
Table 1-6 Save the current-configuration
Operation Command
Save the current-configuration
save
1.2.4 Erase Configuration Files from Flash Memory
The reset saved-configuration command can be used to erase configuration files
from Flash Memory. The system will use the default configuration parameters for
initialization when the Ethernet switch is powered on for the next time.
Perform the following configuration in user view.
Table 1-7 Erase configuration files from Flash Memory
Operation Command
Erase configuration files from Flash Memory
reset saved-configuration
You may erase the configuration files from the Flash in the following cases:
z After being upgraded, the software does not match with the configuration files.

Huawei Quidway S3500 Series Specifications

General

Brand	Huawei
Model	Quidway S3500 Series
Category	Network Router
Language	English