Huawei Quidway S3500 Series User Manual

Operation Manual - QoS/ACL
Quidway S3500 Series Ethernet Switches Chapter 2 QoS Configuration
Huawei Technologies Proprietary
2-18
Table 2-26 Configuring traffic mirroring
Operation Command
Configure traffic
mirroring
mirrored-to { user-group acl-number | acl-name [ rule rule ] |
{ ip-group { acl-number | acl-name } [ rule rule ] | link-group
{ acl-number | acl-name } [ rule rule ] }* } interface
{ interface-name | interface-type interface-num }
Cancel the
configuration of
traffic mirroring
undo mirrored-to { user-group acl-number | acl-name [ rule
rule ] | { ip-group { acl-number | acl-name } [ rule rule ] |
link-group { acl-number | acl-name } [ rule rule ] }* }
For details about the command, refer to the Command Manual.
2.3.9 Configuring Traffic Statistics
The traffic statistics function is used for counting the data packets of the specified traffic,
that is, this function counts the transmitted data which matches the ACL rules. After the
traffic statistics function is configured, the user can use display qos-global
traffic-statistic command to display the statistics information.
You can use the following command to configure traffic statistics.
Perform the following configuration in system view.
Table 2-27 Configuring traffic statistics
Operation Command
Configure traffic
statistics
traffic-statistic { user-group { acl-number | acl-name }
[ rule rule ] | { ip-group { acl-number | acl-name } [ rule rule ]
| link-group { acl-number | acl-name } [ rule rule ] }* }
Cancel the
configuration of
traffic statistics
undo traffic-statistic { user-group { acl-number |
acl-name } [ rule rule ] | { ip-group { acl-number | acl-name }
[ rule rule ] | link-group { acl-number | acl-name } [ rule
rule ] }* }
Display the
statistics
information
display qos-global traffic-statistic
For details about the command, refer to the Command Manual.
2.3.10 Displaying and Debugging QoS
After the above configuration, execute display command in any view to display the
running of the QoS configuration, and to verify the effect of the configuration. Execute
reset command in user view to clear the statistics of QoS module.

Huawei Quidway S3500 Series Specifications

General

Brand	Huawei
Model	Quidway S3500 Series
Category	Network Router
Language	English