Huawei Quidway S3500 Series User Manual

Operation Manual - System Management
Quidway S3500 Series Ethernet Switches Chapter 4 System Maintenance and Debugging
Huawei Technologies Proprietary
4-20
Table 4-33 Enabling terminal display function
Operation Command
Enable terminal display function of log, debugging and
trap information
terminal monitor
Disable terminal display function of the above information
undo terminal
monitor
Enable terminal display function of debugging information
terminal debugging
Disable terminal display function of debugging information
undo terminal
debugging
Enable terminal display function of log information
terminal logging
Disable terminal display function of log information
undo terminal
logging
Enable terminal display function of trap information
terminal trapping
Disable terminal display function of trap information
undo terminal
trapping
4.5.6 Sending the Configuration Information to Log Buffer
To send configuration information to log buffer, follow the steps below:
1) Enabling info-center
Perform the following operation in system view.
Table 4-34 Enabling/disabling info-center
Operation Command
Enable info-center info-center enable
Disable info-center undo info-center enable
 Note:
Info-center is enabled by default. After info-center is enabled, system performances are
affected when the system processes much information because of information
classification and outputting.
2) Configuring to output information to log buffer
Perform the following operation in system view.

Huawei Quidway S3500 Series Specifications

General

Brand	Huawei
Model	Quidway S3500 Series
Category	Network Router
Language	English