Huawei Quidway S3500 Series User Manual

Operation Manual - System Management
Quidway S3500 Series Ethernet Switches Chapter 5 SNMP Configuration
Huawei Technologies Proprietary
5-7
5.3.11 Add/Delete a User to/from an SNMP Group
You can use the following commands to add or delete a user to/from an SNMP group.
Perform the following configuration in system view.
Table 5-12 Add/Delete a user to/from an SNMP group
Operation Command
Add a user to
an SNMP
group.
snmp-agent usm-user { v1 | v2c } username groupname [ acl
acl-list ]
snmp-agent usm-user v3 username groupname
[ authentication-mode { md5 | sha } authpassstring
[ privacy-mode { des56 privpassstring } ] ] [ acl acl-list ]
Delete a user
from an SNMP
group.
undo snmp-agent usm-user { v1 | v2c } username groupname
undo snmp-agent usm-user v3 username groupname { local |
engineid engine-id }
5.3.12 Create/Update View Information or Deleting a View
You can use the following commands to create, update the information of views or
delete a view.
Perform the following configuration in system view.
Table 5-13 Create/Update view information or deleting a view
Operation Command
Create/Update view
information
snmp-agent mib-view { included | excluded }
view-name oid-tree
Delete a view undo snmp-agent mib-view view-name
5.3.13 Set the Size of SNMP Packet Sent/Received by an Agent
You can use the following commands to set the size of SNMP packet sent/received by
an agent.
Perform the following configuration in system view.
Table 5-14 Set the size of SNMP packet sent/received by an agent
Operation Command
Set the size of SNMP packet sent/received by
an agent
snmp-agent packet max-size
byte-count
Restore the default size of SNMP packet
sent/received by an agent
undo snmp-agent packet
max-size

Huawei Quidway S3500 Series Specifications

General

Brand	Huawei
Model	Quidway S3500 Series
Category	Network Router
Language	English