Huawei Quidway S3500 Series User Manual

Operation Manual - Multicast
Quidway S3500 Series Ethernet Switches Chapter 2 GMRP Configuration
Huawei Technologies Proprietary
2-2
2.2.2 Enable/Disable GMRP on the Port
Perform the following configuration in Ethernet port view.
Table 2-2 Enable/Disable GMRP on the port
Operation Command
Enable GMRP on the port
gmrp
Disable GMRP on the port
undo gmrp
GMRP should be enabled globally before enabled on a port.
By default, GMRP is disabled on the port.
2.3 Display and debug GMRP
After the above configuration, execute display command in any view to display the
running of the GMRP configuration, and to verify the effect of the configuration.
Execute debugging command in user view to debug GMRP configuration.
Table 2-3 Display and debug GMRP
Operation Command
Display GMRP statistics.
display gmrp statistics [ interface
interface_list ]
Display GMRP global status.
display gmrp status
Enable GMRP debugging
debugging gmrp event
Disable GMRP debugging
undo debugging gmrp event
2.4 GMRP Configuration Example
I. Networking requirements
Implement dynamic registration and update of multicast information between switches.
II. Networking diagram
Switch_A
Switch_B
Figure 2-1 GMRP networking

Huawei Quidway S3500 Series Specifications

General

Brand	Huawei
Model	Quidway S3500 Series
Category	Network Router
Language	English