Huawei Quidway S3500 Series User Manual

Operation Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches Chapter 4 OSPF Configuration
Huawei Technologies Proprietary
4-5
z Configuring NSSA of OSPF
z Configuring the Route Summarization of OSPF Area
z Configuring OSPF Area Route Summary
z Configuring OSPF Virtual Link
z Configuring Summarization of Imported Routes by OSPF
z Configuring the OSPF Area to Support Packet Authentication
z Configuring OSPF Packet Authentication
z Configuring OSPF to import Routes of Other Protocols
z Configuring Parameters for OSPF to Import External Routes
z Configuring OSPF to Import the Default Route
z Setting OSPF Route Preference
z Configuring OSPF Route Filtering
z Configuring to Fill the MTU Field When an Interface Transmits DD Packets
z Disabling the Interface to Send OSPF Packets
z Configuring OSPF and Network Management System
z Resetting the OSPF Process
4.2.1 Enabling OSPF and Enter OSPF View
Perform the following configurations in system view.
Table 4-1 Enabling OSPF process
Operation Command
Enable OSPF process
ospf
Disable the OSPF process
undo ospf
By default, OSPF is not enabled.
4.2.2 Entering OSPF Area view
Perform the following configurations in OSPF view.
Table 4-2 Entering OSPF Area view
Operation Command
Enter OSPF Area view
area area-id
delete a designated OSPF area
undo area area-id
area-id: ID of the OSPF area, which can be a decimal integer or in IP address format.

Huawei Quidway S3500 Series Specifications

General

Brand	Huawei
Model	Quidway S3500 Series
Category	Network Router
Language	English