Huawei Quidway S3500 Series User Manual

Operation Manual - Getting Started
Quidway S3500 Series Ethernet Switches Chapter 4 User Interface Configuration
Huawei Technologies Proprietary
4-11
[Quidway-ui-vty0] auto-execute command telnet 10.110.100.1
When a user logs on via VTY 0, the system will run telnet 10.110.100.1 automatically.
4.3 Displaying and Debugging User Interface
After the above configuration, execute display command in any view to display the
running of the user interface configuration, and to verify the effect of the configuration.
Execute free command in user view to clear a user in a specified user interface.
Table 4-20 Displaying and debugging user interface
Operation Command
Clear a user in a specified user interface free user-interface [ type ] number
Display the user application information
of the user interface
display users [ all ]
Display the physical attributes and some
configurations of the user interface
display user-interface [ type number ]
[ number ]

Huawei Quidway S3500 Series Specifications

General

Brand	Huawei
Model	Quidway S3500 Series
Category	Network Router
Language	English