Huawei Quidway S3500 Series User Manual

Operation Manual - Port
Quidway S3500 Series Ethernet Switches Chapter 1 Ethernet Port Configuration
Huawei Technologies Proprietary
1-4
Perform the following configuration in Ethernet port view.
Table 1-4 Set duplex attribute for Ethernet port
Operation Command
Set duplex attribute for Ethernet port. duplex { auto | full | half }
Restore the default duplex attribute of Ethernet port.
undo duplex
Note that, the 100M electrical Ethernet port supports full duplex, half duplex and
auto-negotiation, which can be set as per the requirements.
100M optical Ethernet port supports full duplex and can be configured to operate in full
(full duplex) or auto (auto-negotiation) mode.
Gigabit Ethernet port can be configured as full (full duplex) or auto (auto-negotiation).
(1) For Gigabit Ethernet port of S3552G/S3552P/S3528G/S3528P/S3552F, the duplex
mode can also be configured as half (half duplex). (2) 1000Base-T Ethernet ports of
S3526E/S3526C Ethernet switches can operate in full-/half-duplex or auto-negotiation
mode. However, if the speed has been set to 1000Mbps, the duplex mode can only be
set to full (full-duplex) or auto (auto-negotiation).
The port defaults the auto (auto-negotiation) mode.
1.2.5 Set Speed on the Ethernet Port
You can use the following command to set the speed on the Ethernet port. If the speed
is set to auto-negotiation mode, the local and peer ports will automatically negotiate
about the port speed.
Perform the following configuration in Ethernet port view.
Table 1-5 Set speed on Ethernet port
Operation Command
Set 100M Ethernet port speed speed { 10 | 100 | auto }
Set Gigabit Ethernet port speed speed { 10 | 100 | 1000 | auto }
Restore the default speed on Ethernet port
undo speed
Note that, the 100M electrical Ethernet port supports 10Mbps, 100Mbps and
auto-negotiation, which can be set as per the requirements.
100M optical Ethernet port supports 100Mbps can be configured to operate at a speed
of 100 (100Mbps) and auto (auto-negotiation.)
Gigabit Ethernet port can be set to 1000 (1000Mbps) and auto (auto-negotiation). (1)
For Gigabit Ethernet port of S3552G/S3552P/S3528G/S3528P/S3552F, the speed can
only be set to 1000 (1000Mbps), which need not configuring. (2) 1000Base-T Ethernet

Huawei Quidway S3500 Series Specifications

General

Brand	Huawei
Model	Quidway S3500 Series
Category	Network Router
Language	English