Operation Manual - Network Protocol
Quidway S3500 Series Ethernet Switches Chapter 5 DHCP Configuration
Huawei Technologies Proprietary
5-17
For both global and VLAN interface address pools, NetBIOS node type of clients
defaults to h-node.
5.3.9 Configure a DHCP Option
New configurable DHCP options may emerge as the result of DHCP development. You
can support these options by manually adding them into the attribute list maintained by
the DHCP server.
I. Configure a DHCP option for a global DHCP address pool
Perform the following configuration in DHCP address pool view.
Table 5-25 Configure a DHCP option for the global DHCP address pool
Operation Command
Configure a DHCP option for the
global DHCP address pool
option code { ascii ascii-string | hex
hex-string | ip-address ip-address
[ ip-address ] }
Delete a DHCP option of the global
DHCP address pool
undo option code
II. Configure a DHCP option for the DHCP address pool on the current VLAN
interface
Perform the following configuration in VLAN interface view.
Table 5-26 Configure a DHCP option for the DHCP address pool on the current VLAN
interface
Operation Command
Configure a DHCP option in the DHCP
address pool on the current VAN
interface
dhcp server option code { ascii
ascii-string | hex hex-string | ip-address
ip-address [ ip-address ] }
Delete a DHCP option of the DHCP
address pool on the current VLAN
interface
undo dhcp server option code
III. Configure a DHCP option for DHCP address pools on multiple VLAN
interfaces
Perform the following configuration in system view.