Operation Manual - QoS/ACL
Quidway S3500 Series Ethernet Switches Chapter 2 QoS Configuration
Huawei Technologies Proprietary
2-19
Table 2-28 Displaying and debugging QoS
Operation Command
Display the parameter settings of all the
QoS actions
display qos-global all
Display the mapping relationship between
cos and local precedence
display qos
cos-local-precedence-map
Display the parameter settings of traffic
mirroring
display qos-global mirrored-to
Display the parameter settings of port
mirroring
display mirror
Display the queue scheduling mode and
parameter
display queue-scheduler
Display the settings of QoS
display qos-interface
[ interface-name | interface-type
interface-num ] all
Display the parameter settings of traffic
limit
display qos-interface
[ interface-name | interface-type
interface-num ] traffic-limit
Display the port traffic limit
display qos-interface
[ interface-name | interface-type
interface-num ] line-rate
Display the settings of priority tag
display qos-global traffic-priority
Display the settings of redirection
display qos-global traffic-redirect
Display the information about the traffic
display qos-global traffic-statistic
Clear the statistics information
reset traffic-statistic { all |
user-group { acl-number | acl-name }
[ rule rule ] | { ip-group { acl-number |
acl-name } [ rule rule ] | link-group
{ acl-number | acl-name } [ rule
rule ] }* }
For output and description of the related commands, refer to the Command Manual.
2.4 Configuring QoS of S3552 Series Switches
QoS configuration tasks include:
z Configuring packet filter
z Configuring service group allocation rules
z Configuring priority remark
z Configuring traffic policing
z Configuring traffic shaping
z Configuring redirection