Huawei Quidway S3500 Series User Manual

Operation Manual - System Management
Quidway S3500 Series Ethernet Switches Chapter 7 NTP Configuration
Huawei Technologies Proprietary
7-7
7.2.2 Configure NTP ID Authentication
Enable NTP authentication, set MD5 authentication key, and specify the reliable key. A
client will synchronize itself by a server only if the serve can provide a reliable key.
Perform the following configurations in system view.
Table 7-7 Configure NTP authentication
Operation Command
Enable NTP authentication
ntp-service authentication enable
Disable NTP authentication
undo ntp-service authentication enable
7.2.3 Set NTP Authentication Key
This configuration task is to set NTP authentication key.
Perform the following configurations in system view.
Table 7-8 Configure NTP authentication key
Operation Command
Configure NTP authentication key
ntp-service authentication-keyid number
authentication-mode md5 value
Remove NTP authentication key
undo ntp-service authentication-keyid
number
Key number number ranges from 1 to 4294967295; the key value contains 1 to 32
ASCII characters.
7.2.4 Set Specified Key as Reliable
This configuration task is to set the specified key as reliable.
Perform the following configurations in system view.
Table 7-9 Set the specified key as reliable
Operation Command
Set the specified key as
reliable
ntp-service reliable authentication-keyid
key-number
Cancel the specified reliable
key.
undo ntp-service reliable authentication-keyid
key-number
Key number key-number ranges from 1 to 4294967295

Huawei Quidway S3500 Series Specifications

General

Brand	Huawei
Model	Quidway S3500 Series
Category	Network Router
Language	English