Huawei Quidway S3500 Series User Manual

Operation Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches Chapter 5 BGP Configuration
Huawei Technologies Proprietary
5-12
By default, route filtering based on AS path list for a peer (group) is disabled.
IV. Configuring route filtering policy based on address prefix list for a peer
(group)
Table 5-20 Configuring route filtering policy based on address prefix list for a peer
(group)
Operation Command
Configure the route filtering policy
based on address prefix list for a peer
(group)
peer { peer-address | group-name }
ip-prefix prefixname { import | export }
Remove the route filtering policy based
on address prefix list of a peer (group)
undo peer { peer-address | group-name }
ip-prefix prefixname { import | export }
By default, route filtering based on address prefix list for a peer (group) is disabled.
5.2.5 Configuring Networks for BGP Distribution
Perform the following configurations in BGP view.
Table 5-21 Configuring Networks for BGP Distribution
Operation Command
Configure the local network
route
network ip-address address-mask [ route-policy
route-policy-name ]
Remove the local network
route
undo network ip-address address-mask
[ route-policy route-policy-name ]
By default, no network is configured for BGP distribution.
5.2.6 Configuring the Interaction between BGP and IGP
I. Importing IGP routes
BGP can transmit the internal network information of local AS to other AS. To reach
such objective, the network information about the internal system learned by the local
router via IGP routing protocol can be transmitted.
Perform the following configurations in BGP view.

Huawei Quidway S3500 Series Specifications

General

Brand	Huawei
Model	Quidway S3500 Series
Category	Network Router
Language	English