Huawei Quidway S3500 Series User Manual

Operation Manual - System Management
Quidway S3500 Series Ethernet Switches Chapter 3 Device management
Huawei Technologies Proprietary
3-2
3.2.3 Upgrade BootROM
You can use this command to upgrade the BootROM with the BootROM program in the
Flash Memory. This configuration task facilitates the remote upgrade. You can upload
the BootROM program file from a remote end to the switch via FTP and then use this
command to upgrade the BootROM.
Perform the following configuration in user view.
Table 3-3 Upgrade BootROM
Operation Command
Upgrade BootROM
boot bootrom file-url
3.2.4 Set Temperature Limit
The switch system alarms when the temperature of the switch exceeds the preset limit.
Perform the following configuration in user view.
Table 3-4 Set temperature limit
Operation Command
Set temperature limit
temperature-limit slot-num down-value up-value
Restore temperature limit
to default value
undo temperature-limit slot-num
3.3 Display and Debug Device Management Configuration
After the above configuration, execute display command in any view to display the
running of the Device management configuration, and to verify the effect of the
configuration.
Table 3-5 Display and debug Device management configuration
Operation Command
Display the APP to be applied when rebooting the switch.
display boot-loader
Display the module types and running states of each slot
display device
Display the busy status of CPU
display cpu
Display the Used status of switch memory
display memory [ slot
slot-number ]
Display the running state of the built-in fans. display fan [ fan-id ]

Huawei Quidway S3500 Series Specifications

General

Brand	Huawei
Model	Quidway S3500 Series
Category	Network Router
Language	English