Huawei Quidway S3500 Series User Manual

Operation Manual - Network Protocol
Quidway S3500 Series Ethernet Switches Chapter 3 Proxy ARP
Huawei Technologies Proprietary
3-4
3.6 DHCP Client Configuration
DHCP client configuration include:
z Configuring a VLAN interface to obtain IP address using DHCP
3.6.1 Configuring a VLAN Interface to Obtain IP Address Using DHCP
Perform the following configuration in VLAN interface view.
Table 3-3 Configuring a VLAN interface to obtain IP address using DHCP
Operation Command
Configure VLAN interface to obtain IP
address using DHCP
ip address dhcp-alloc
Remove the configuration
undo ip address dhcp-alloc
By default, the VLAN interface does not obtain IP address using DHCP.
3.7 Displaying and Debugging DHCP Client Configuration
After the above configuration, execute display command in any view to display the
running of the DHCP Client configuration, and to verify the effect of the configuration.
Execute debugging command in user view to debug DHCP Client configuration.
Table 3-4 Displaying and debugging DHCP Client configuration
Operation Command
Display address allocation
information of DHCP client
display dhcp client [ verbose ]
Enable/disable DHCP client
debugging
[ undo ] debugging dhcp client { all | error |
event | packet }

Huawei Quidway S3500 Series Specifications

General

Brand	Huawei
Model	Quidway S3500 Series
Category	Network Router
Language	English