Huawei Quidway S3500 Series User Manual

Operation Manual - Security
Quidway S3500 Series Ethernet Switches Chapter 3 AAA and RADIUS Protocol Configuration
Huawei Technologies Proprietary
3-21
3.4 Displaying and Debugging AAA and RADIUS Protocol
After the above configuration, execute display command in any view to display the
running of the AAA and RADIUS configuration, and to verify the effect of the
configuration. Execute reset command in user view to reset AAA and RADIUS
statistics, etc. Execute debugging command in user view to debug AAA and RADIUS.
Table 3-27 Displaying and debugging AAA and RADIUS protocol
Operation Command
Display the configuration
information of the specified or
all the ISP domains.
display domain [ isp-name ]
Display related information of
user’s connection
display connection [ access-type { dot1x |
portal } | domain isp-name | interface portnum |
ip ip-address | mac mac-address |
radius-scheme radius-scheme-name | vlan
vlanid | ucibindex ucib-index | user-name
user-name ]
Display related information of
the local user(S3526, S3526
FM and S3526 FS switches
don’t support ssh parameter.)
display local-user [ domain isp-name | idle-cut
{ disable | enable } | service-type { telnet | ftp |
lan-access | ssh } | state { active | block } |
user-name user-name | vlan vlan-id]
Display the statistics of local
RADIUS authentication server
display local-server statistics
Display the configuration
information of all the RADIUS
schemes or a specified one
display radius [ radius-scheme-name ]
Display the statistics of RADIUS
packets
display radius statistics
Display the stopping accounting
requests saved in buffer without
response (from system view)
display stop-accounting-buffer
{ radius-scheme radius-scheme-name |
session-id session-id | time-range start-time
stop-time | user-name user-name }
Delete the stopping accounting
requests saved in buffer without
response (from system view)
reset stop-accounting-buffer { radius-scheme
radius-scheme-name | session-id session-id |
time-range start-time stop-time | user-name
user-name }
Reset the statistics of RADIUS
server.
reset radius statistics
Enable RADIUS packet
debugging
debugging radius packet
Disable RADIUS packet
debugging
undo debugging radius packet
Enable debugging of local
RADIUS authentication server
debugging local-server { all | error | event
packet }

Huawei Quidway S3500 Series Specifications

General

Brand	Huawei
Model	Quidway S3500 Series
Category	Network Router
Language	English