EasyManuals Logo

Huawei Quidway S3500 Series User Manual

Huawei Quidway S3500 Series
671 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #180 background imageLoading...
Page #180 background image
Operation Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches Chapter 3 RIP Configuration
Huawei Technologies Proprietary
3-5
processing will be refused. As there is no zero fields in the RIP-2 packet, this
configuration is invalid for RIP-2.
Perform the following configurations in RIP view.
Table 3-5 Configuring zero field check of the interface packet
Operation Command
Configure zero field check on the RIP-1 packet
checkzero
Disable zero field check on the RIP-1 packet
undo checkzero
By default, RIP-1 performs zero field check on the packet.
3.2.6 Specifying the operating state of the interface
In the Interface view, you can specify the operating state of RIP on the interface. For
example, whether RIP operates on the interface, namely, whether RIP update packets
are sent and received on the interface. In addition, whether an interface sends or
receives RIP update packets can be specified separately.
Perform the following configuration in Interface view:
Table 3-6 Specifying the operating state of the interface
Operation Command
Enable the interface to run RIP
rip work
Disable the interface to run RIP
undo rip work
Enable the interface to receive RIP update packet
rip input
Disable the interface to receive RIP update packet
undo rip input
Enable the interface to send RIP update packet
rip output
Disable the interface to send RIP update packet
undo rip output
The undo rip work command and the undo network command have similar but not all
the same functions. Neither of the two commands configures interface receiving or
sending RIP route. But in the undo rip work status, other interfaces still forward the
route of the interface applying this command, while in the undo network status, other
interface will no more forward the route of the interface applying this command, and it
seems that this interface has been removed.
In addition, rip work is functionally equivalent to both rip input and rip output
commands.
By default, all interfaces except loopback interfaces both receive and transmit RIP
update packets.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei Quidway S3500 Series and is the answer not in the manual?

Huawei Quidway S3500 Series Specifications

General IconGeneral
BrandHuawei
ModelQuidway S3500 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals