Operation Manual - Getting Started
Quidway S3500 Series Ethernet Switches Chapter 1 Product Overview
Huawei Technologies Proprietary
1-4
Features Description
Security features
Supports Multi-level user management and password protect
Supports 802.1X authentication
Supports Packet filtering
Support Portal (Only applies to S3552G, S3552P, S3528G,
S3528P and S3552F in S3500 series switches.)
Support dynamic VLAN (Only applies to S3552G, S3552P,
S3528G, S3528P, S3552F, S3526E, S3526E FM, S3526E FS
and S3526C in S3500 series switches.)
Support Guest VLAN (Only applies to S3552G, S3552P,
S3528G, S3528P, S3552F, S3526E, S3526E FM, S3526E FS
and S3526C in S3500 series switches.)
Reliability Supports Virtual Redundancy Routing Protocol (VRRP)
Quality of Service
(QoS)
Supports traffic classification
Supports bandwidth control
Supports priority
Supports queues of different priority on the port
Queue scheduling: supports Strict Priority Queuing (SP),
Weighted Round Robin (WRR), Delay bounded WRR (only
S3526E, S3526E FM, S3526E FS, S3526C support the WRR
with the maximum delay)
Management and
Maintenance
Supports command line interface configuration
Supports configuration via Console port
Supports remote configuration via Telnet or SSH
Supports configuration through dialing the Modem
Supports SNMP management (Supports Quidview NMS and
RMON MIB Group 1, 2, 3 and 9)
Supports system log
Supports level alarms
Supports Huawei Group Management Protocol (HGMP) V2
Supports output of the debugging information
Supports PING and Tracert
Supports the remote maintenance via Telnet, Modem and SSH
Loading and
update
Supports to load and upgrade software via XModem protocol
Supports to load and upgrade software via File Transfer
Protocol (FTP) and Trivial File Transfer Protocol (TFTP)
To Next Page
Loading...
