Operation Manual - Getting Started
Quidway S3500 Series Ethernet Switches Chapter 2 Logging in Switch
Huawei Technologies Proprietary
2-2
Figure 2-3 Configuring the port for connection
Figure 2-4 Setting communication parameters
Step 3: The switch is powered on. Display self-test information of the switch and prompt
you to press Enter to show the command line prompt such as <Quidway>.
Step 4: Input a command to configure the switch or view the operation state. Input a “?”
for an immediate help. For details of specific commands, refer to the following chapters.
To Next Page
Loading...
Need help?
General
