Huawei Quidway S3500 Series User Manual

Operation Manual - Integrated Management
Quidway S3500 Series Ethernet Switches Chapter 2 HGMP V2 Configuration
Huawei Technologies Proprietary
2-21
[Quidway] ntdp enable
[Quidway] interface ethernet 1/1
[Quidway-Ethernet1/1] ntdp enable
# Run the cluster function.
[Quidway] cluster enable
 Note:
Upon the completion of the above configurations, you can use the cluster switch-to
{ member-num | mac-address H-H-H } command to switch to the member device view
to maintain and manage the member devices, and use the cluster switch-to
administrator command to resume the administrator device view. To reset a member
device through the administrator device, use the reboot member { member-num |
mac-address H.H.H } [ eraseflash ] command. For detailed information about these
configurations, refer to the preceding description of this chapter.

Huawei Quidway S3500 Series Specifications

General

Brand	Huawei
Model	Quidway S3500 Series
Category	Network Router
Language	English