Huawei Quidway S3500 Series User Manual

Operation Manual - Security
Quidway S3500 Series Ethernet Switches Chapter 3 AAA and RADIUS Protocol Configuration
Huawei Technologies Proprietary
3-6
I. Setting the password display mode
Perform the following configurations in system view.
Table 3-4 Setting the method that a local user uses to display password
Operation Command
Set the mode that a local user
uses to display password
local-user password-display-mode
{ cipher-force | auto }
Cancel the mode that the local
user uses to display password
undo local-user password-display-mode
Where, auto means that the password display mode will be the one specified by the
user at the time of configuring password (see the password command in the following
table for reference), and cipher-force means that the password display mode of all the
accessing users must be in cipher text.
II. Setting the attributes of local users
Perform the following configurations in local user view.
Table 3-5 Setting/Removing the attributes concerned with a specified user
Operation Command
Set a password for a
specified user
password { simple | cipher } password
Remove the password set
for the specified user
undo password
Set the state of the specified
user
state { active | block }
Set a service type for the
specified user (For S3552G,
S3552P, S3528G, S3528P,
S3526E, S3526E FM,
S3526E FS and S3526C)
service-type { ftp [ ftp-directory directory ] |
lan-access | { ssh | telnet }* [ level level ] }
Cancel the service type of
the specified user (For
S3552G, S3552P, S3528G,
S3528P, S3526E, S3526E
FM, S3526E FS and
S3526C)
undo service-type { ftp [ ftp-directory ] |
lan-access | { ssh | telnet }* [ level level ] }
Set a service type for the
specified user (For S3526,
S3526 FM and S3526 FS)
service-type { ftp [ ftp-directory directory ] |
lan-access | telnet [ level level ] }

Huawei Quidway S3500 Series Specifications

General

Brand	Huawei
Model	Quidway S3500 Series
Category	Network Router
Language	English