Huawei Quidway S3500 Series User Manual

Operation Manual - Auto Detecting
Quidway S3500 Series Ethernet Switches Chapter 1 Configuring Auto Detecting
Huawei Technologies Proprietary
1-3
III. Configuration procedure
# Enter system view.
<Quidway> system-view
# Create a detecting group numbered 10 and enter its view.
[Quidway] detect-group 10
# Specify to detect the interface with an IP address of 10.1.1.4 and take the interface
with an IP address of 192.168.1.2 as the next hop, and set the number of this operation
to 1.
[Quidway-detect-group-10] detect-list 1 ip address 10.1.1.4 nexthop
192.168.1.2
# Specify to detect the interface with an IP address of 192.168.2.2 and set the number
of this operation to 1.
[Quidway-detect-group-10] detect-list 2 ip address 192.168.2.2
# Specify to return reachable as the detecting result if one of the two interfaces is
detected to be reachable.
[Quidway-detect-group-10] option or
# Set the detecting interval to 60 seconds.
[Quidway-detect-group-10] timer loop 60
# Set the maximum retries during a detection to 3.
[Quidway-detect-group-10] retry 3
# Set the detecting timeout time to 3 seconds.
[Quidway-detect-group-10] timer wait 3
[Quidway-detect-group-10] quit
# Display configurations of detecting group 10.
[Quidway] display detect-group 10

Huawei Quidway S3500 Series Specifications

General

Brand	Huawei
Model	Quidway S3500 Series
Category	Network Router
Language	English