Juniper M Series User Manual

Table 33: T640 Router Chassis Component Alarm Conditions (continued)
Alarm
SeverityRemedyAlarm Condition
Chassis
Component
YellowReplace the failed FPC.An FPC has an out-of-range
or invalid temperature reading.
FPC
RedReplace the failed FPC.An FPC microcode download
has failed.
RedReplace the failed FPC.An FPC has failed. If this
occurs, the FPC attempts to
reboot. If the SCB sees that an
FPC is rebooting too often, it
shuts down the FPC.
RedReplace the failed FPC.Too many hard errors in FPC
memory.
RedReplace the failed FPC.Too many soft errors in FPC
memory.
Red-----------------------------------Too many hot-swap interrupts
are occurring. This message
generally indicates that a
hardware component that
plugs into the router’s
backplane from the front
(generally, an FPC) is broken.
Hot swapping
99Copyright © 2012, Juniper Networks, Inc.
Chapter 3: Method and Tools for Monitoring Router Components

Juniper M Series Specifications

General

Brand	Juniper
Model	M Series
Category	Network Router
Language	English