Juniper M Series - Figure 322: T320 Router Cooling System Components

Figure 322: T320 Router Cooling System Components
Related
Documentation
Checklist for Monitoring Redundant Cooling System Components on page 623•
T640 Router Redundant Cooling System Components
The T640 router cooling system includes:
•
Two front fan trays
•
Front air filter
•
Rear fan tray
•
Rear air filter
The cooling system components work together to keep all router components within the
acceptable temperature range. All fan trays and filters are hot-insertable and
hot-removable. The two front fan trays are interchangeable. The front and rear fan trays
are not interchangeable.
Copyright © 2012, Juniper Networks, Inc.636
M Series and T Series Routers Monitoring and Troubleshooting Guide