[...Output truncated...]
CIP REV 02 710-001593 AA9564
[...Output truncated...]
Meaning The command output displays the CIP slot number, revision level, part number, and serial
number.
Locating the CIP Serial Number ID Label
Purpose To locate the serial number ID on the CIP.
Action To locate the CIP serial number ID label, look on the top of the left side of the CIP (see
Figure 257 on page 487).
Figure 257: CIP Serial Number ID Label
Related
Documentation
Checklist for Monitoring the CIP on page 479•
Replace the CIP
The CIP is field-replaceable, but is not hot-removable, hot-insertable, or hot-pluggable.
You must power down the router before removing or installing it.
To replace a the CIP, see “Return the Failed Component” on page 116, or the procedure
to return a field-replaceable unit in the M40e or M160 router hardware guide.
Related
Documentation
• Checklist for Monitoring the CIP on page 479
487Copyright © 2012, Juniper Networks, Inc.
Chapter 21: Monitoring the CIP
To Next Page
Loading...
Need help?
General
